The floor scrubber can easily solve the problem of floating dust on the surface of the epoxy floor.

Most of the floating dust is brought in from the outside or caused by the dust remaining in the air after decoration floating down. If these dusts are swept with a broom, they will still raise dust and disperse in the air. The common method is to mop the floor. Since the mop has no water - absorbing effect, it can only collect the dust and there will still be many marks. Another way is to collect the dust with a vacuum cleaner, and an industrial vacuum cleaner with a high - filtration level is still needed. After sucking up the dust, the floor still needs to be mopped with a mop, otherwise the floor will still get dirty. The situation is different when using a floor scrubber. The floor scrubber sprays clean water and cleans the floor through the brush disc. The rear water suction squeegee assembly can immediately collect the dirty dust and sewage into the sewage tank. It can not only remove the floating dust but also clean the floor. This is a rare high - quality device.