Tips for cleaning the filter of commercial oil fume purifiers: Make oil fume purification more effec

Commercial oil fume purifiers are one of the essential equipment in the catering industry. They can effectively filter the oil fume generated in the kitchen, ensuring the health of employees and the environment. However, as the usage time increases, the filter screens of the oil fume purifier will gradually accumulate oil stains, affecting the purification effect. This article will introduce some tips for cleaning the filter screens of commercial oil fume purifiers to make your oil fume purification more efficient.

1. Preparation work before cleaning

Before cleaning the filter screen of the oil fume purifier, we need to do some preparation work to ensure the safety and smoothness of the operation.

First, turn off the power supply of the oil fume purifier to avoid accidents. Then, prepare cleaning tools such as brushes, cleaning agents, and cleaning cloths. Finally, choose a well - ventilated place for cleaning to avoid the irritation of oil fume and cleaning agents.

Preparation work before cleaning the filter screen

2. Steps for cleaning the filter screen

Step 1: Remove the filter screen

First, according to the user manual of the oil fume purifier, find the location of the filter screen and remove it. Usually, the filter screen of a commercial oil fume purifier is composed of multiple layers of grids and needs to be removed layer by layer.

Step 2: Remove the oil stains

Put the removed filter screen into clean water and soak it for a while to soften the oil stains attached to the filter screen. Then, gently brush the filter screen with a brush, paying special attention to cleaning every corner and gap of the filter screen.

Step 3: Clean the filter screen

Take out the soaked filter screen, spray the cleaning agent on the surface of the filter screen, and then use a brush to clean it thoroughly again. The cleaning agent can effectively decompose the oil stains and restore the filter screen to the best clean state.

Step 4: Rinse the filter screen

Thoroughly rinse the filter screen with clean water to ensure that the residual cleaning agent and oil stains are removed. You can rinse it several times until the water on the filter screen becomes completely clear.

Step 5: Dry the filter screen

Dry the cleaned filter screen. You can use natural wind or a hair dryer to accelerate the drying process. Make sure the filter screen is completely dry before reinstalling it on the oil fume purifier.

Conclusion

Through the above simple steps, we can easily clean the filter screen of the commercial oil fume purifier and keep it in an efficient purification state. Regularly cleaning the filter screen can not only extend the service life of the oil fume purifier but also improve the purification efficiency and ensure the health of employees and the environment.